See other templatesSee other templates

Training

Today I Learned 

Today I Learned - Calypso Setup Mode

This mode will allow you to edit a feature strategy during a CNC program run. For example, the parts vary and you would like to change the speed, or number of points, etc.. depending on the surface a feature to be measured. This is how it is done.

 

Be sure to follow us on YouTube

 

 

Today I Learned

T.I.L. - Calypso - Importing a Point File

In our continuing series of Today I Learned we will cover how to import a point file into Calypso. You must first have or create your own point file list. You can create this in Notepad or Wordpad and it should look like this:

X, Y, Z, I, J, K

Each value should be separated by a comma. Use CAD/ Creating Features to import the file as shown in the video.

 

 Be sure an subscribe to our YouTube Channel

 

 

 

 

 

Mark Boucher Consulting, a CMM Quarterly company, offers the best training in the business whether you need onsite, over the web training or programming. Click on the image above to view our services.

 

 

 

Today I Learned

 

T.I.L. - Calypso - Cartesian Distance

 

There are many distance options in Calypso one of these is Cartesian Distance. Cartesian Distance allow you to define the distance between two features in several different ways (1) with on datum constraint (2) distance constrained perpendicular to a datum and (3) distance constrained parallel to a datum.

The different methods are shown in this video. 

 Be sure an subscribe to our YouTube Channel

 

 

 

 

Mark Boucher Consulting, a CMM Quarterly company, offers the best training in the business whether you need onsite, over the web training or programming. Click on the image above to view our services.

 

Today I Learned

 

Our continuing series will cover Calypso's Transfer Format or "the paintbrush tool". This tool allows, as you can see below, to copy the Strategy, Evaluation, Characteristics, etc... of one feature to multiple features. This only works with the same feature type. if you choose a Cylinder you may only apply to cylinders and not both cylinders and circles at the same time.

 

Here is a video showing how to use Transfer format. This is video and more is located on our YouTube channel. Be sure to subscribe and click the Like button.

 

 

  

 

 

 

Mark Boucher Consulting, a CMM Quarterly company, offers the best training in the business whether you need onsite, over the web training or programming. Click on the image above to view our services.

 

 

JSN Megazine template designed by JoomlaShine.com